Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 29 page image

29English● When removing the USB memory device, note thefollowing.• When the access indicator of the connected USBmemory device is blinking, it shows the display isloading the data. Do not remove the USB memorydevice while blinking.• Depending on the USB memory device, the accessindicator may remain blinking even when it is notbeing accessed, or the device is not equippedwith an access indicator function, etc. In this case,remove the USB memory device after confirmingthe following or .Switch the input to an input other than [USB]and [MEMORY VIEWER], and confirm that thefunctions that access USB memory device arefinished. The functions are, read user imagefunction (see page 68), playlist edit function(see page 109), data cloning function (see page121), etc.Turn the unit off.• Do not frequently repeat connecting/disconnectingthe USB memory device. Wait at least 5 secondsafter connection, and then remove the USBmemory device. Before reconnection, wait at least5 seconds. A certain length of time is requiredso that the display can recognise that the USBmemory device is switched for connection ordisconnection.• If the power of this unit is turned off or the USBmemory device is removed accidentally whileaccessing data, the data may not be accessednext time the USB memory device is used.In such a case, turn the power of the main unit offand on.● When the power is supplied from MP2 (DC 5V 2A),use a cable supporting a current of 2A or more.Speaker terminal connectionUse 8 Ω/15 W speaker.RedBlackWhile pressing thelever, insert the corewire.Return the lever.