Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 84 page image

84EnglishUsing NetworkFunctionThis unit has a network function and you can control theDisplay connected to the network using your computer.Necessary environment forcomputers to be connectedFirst of all, confirm your computer whether it has a wiredLAN.Before connecting the Display to the computer, be sureto check the following settings.Check 1: About LAN cable● Connect the cable properly.● Use LAN cable that is compatible with category 5eor above.Check 2: Wired LAN settingsComputer with a built-in wired LAN function● Switch on the wired LAN.Computer without a built-in wired LAN function● Check that your wired LAN adapter is recognizedproperly and it is switched on.● Install the wired LAN adapter driver beforehand.For details on how to install the driver, refer to theinstructions accompanying the wired LAN adapter.■ About Web BrowserWeb Browser is necessary to use WEB control.● Compatible OS:Windows, Mac OS● Compatible Web Browser:Internet Explorer 11.0 (Windows)Safari 8.0 / 9.0 / 10.0 / 11.0 (Mac OS)Microsoft EdgeExample of network connectionNote● To use the network function, set each item in[Network settings] and make sure to set [Networkcontrol] to [On].(see page 72)When it is set to [On], power indicator lights orangeunder the condition of power “Off” with remote control(stand-by state).● The DIGITAL LINK / LAN terminal and the LANterminal are connected inside this unit. When usingboth the DIGITAL LINK / LAN terminal and the LANterminal, configure the system in such a way that theyare not connected to the same network directly or viaperipheral devices such as hub and twist pair cabletransmitter.■ LAN Terminal connectionDisplay (Back of the unit)PCLAN terminalLAN cable (commercially available)Hub or broadband routerNote● For LAN cable, use shielded cable, otherwise picturenoise may be caused.● Make sure the broadband router or hub supports10BASE-T / 100BASE-TX.● Touching the LAN Terminal with a statically chargedhand (body) may cause damage to the device due toits discharge.Do not touch the LAN Terminal or the metal part ofthe LAN cable.● For instructions on connection, consult your networkadministrator.