74English■ [DIGITAL LINK(Ethernet control)]Enables or disables the Ethernet connection via theDIGITAL LINK terminal.Note● When this setting is changed, the communication viathe LAN terminal is temporarily disconnected due tosetting switching. Do not change the setting duringLAN communication.● Video and audio from the DIGITAL LINK terminal arenot affected.■ [DIGITAL LINK status]Display the DIGITAL LINK connection environment.Select [DIGITAL LINK status] with and press.-YY dB-XX dBDIGITAL LINK statusLINK statusHDMI statusSignal qualityMinMaxNo linkNo HDMI[LINK status]:1 of the followings will be displayed.[No link]:No LAN connection, etc.[DIGITAL LINK]:Connected to the DIGITAL LINK device by LAN.[Long reach]:Communication method is set to [Long reach] andis connected to the DIGITAL LINK device by LAN.[Ethernet]:The PC is connected to the DIGITAL LINK / LANterminal of this product and is LAN connected.[HDMI status]:Displays the connection status of the HDMI format.1 of the followings will be displayed.[No HDMI]:DIGITAL LINK not connected[HDMI on]:DIGITAL LINK connected[HDCP on]:HDCP supported on DIGITAL LINK[Signal quality]:It is the quantified minimum and maximum numbersof errors that have occurred. The display colours arered, yellow, or green, depending on the number.Signal quality DisplayColoursReceptionStatus-12dB or below Green Good-11 to -8dB Yellow Bad-7dB or above Red Terrible● The number is represented by yellow or red ifthe LAN cable is disconnected or the cable is notshielded.● This signal quality shows figures between thetwisted pair cable transmitter that is connected andthe display.■ [DIGITAL LINK menu]Displays the setting menu of Digital Interface Box.Select [DIGITAL LINK menu] with and press.Note● This function can only be selected when thePanasonic device that supports DIGITAL LINK output(ET-YFB100G, ET-YFB200G) is connected to aDIGITAL LINK / LAN terminal and its power is on.● For details, refer to the manuals of the devices thatsupport DIGITAL LINK output.■ [AMX D. D.]Set whether to allow the Display to be detected by AMXDevice Discovery.[On]:Enables detection by AMX Device Discovery.[Off]:Disables detection by AMX Device Discovery.● For more details, visit the following web site.http://www.amx.com/■ [Crestron Connected]When this function is set to [On], the Display can bemonitored or controlled via the network using equipmentand application software of Crestron Electronics, Inc.This Display supports the following application softwarefrom Crestron Electronics, Inc.• RoomView Express• Crestron FusionCrestron Connected is a function to connect to a systemdeveloped by Crestron Electronics, Inc. which managesand controls multiple system devices connected to thenetwork.● For details of Crestron Connected, refer to theCrestron Electronics, Inc. web site (Provided only inEnglish).http://www.crestron.com/For the download of “RoomView Express”, refer tothe Crestron Electronics, Inc. web site (Provided onlyin English).(https://www.crestron.com/en-US/resources/get-roomview)■ [Extron XTP]Set to [On] when connecting XTP Transmitter made byExtron to DIGITAL LINK terminal.● For more details on Extron, visit the following website.http://www.extron.com