Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 56 page image

56English■ [MPEG noise reduction]Reduces block noise and mosquito noise on MPEGvideos.[Off]:Disables [MPEG noise reduction].[Min], [Mid], [Max]:Sets strength of [MPEG noise reduction].■ [Input resolution]This menu is displayed at PC IN input.Set the resolution of PC input. This setting isnecessary only when this unit cannot correctly detectthe resolution of PC input.The setting can be changed when the applicablesignals are received. The setting combinations areas follows.• [Auto] / [1024x768] / [1280x768] / [1360x768] /[1366x768]• [Auto] / [1400x1050] / [1680x1050]• [Auto] / [1600x1200] / [1920x1200]Note● Make each adjustment (such as [Auto setup]) onthe [Position] menu as necessary. (see page 42)■ [Signal range]This menu is displayed at HDMI1, HDMI2,DisplayPort, DIGITAL LINK, DVI-D IN and SLOTinputs. Switches the dynamic range to match thesignals from the source connected to each terminal.[Video(16-235)]:If the input signal is the video rangeExample: HDMI terminal output for DVD player[Full(0-255)]:If the input signal is full rangeExample: HDMI terminal output for personalcomputer[Auto]:Switches the dynamic range automatically between[Video(16-235)] and [Full(0-255)] according to theinput signal.Note● [Auto] can be selected at HDMI, DisplayPort,DIGITAL LINK and SLOT signal inputs.■ [Input level]This menu is displayed at PC IN input.Adjustment of parts which are extremely bright andhard to see.-16 to +16:(Level low) ‒ (Level high)■ [Frame creation]Improves motion picture quality. Select [Off] when themotion picture looks unnatural.[Off]:Disables [Frame creation].[On]:Enables [Frame creation].■ [Dynamic backlight control]Improves picture contrast and alleviates whitenessby controlling the back light when signals with the lowaverage brightness level (APL) are input.[On]:Enables [Dynamic backlight control].[Off]:Disables [Dynamic backlight control].Note● The screen may become dark if menu operation orinput signal switching is performed while the on-screen menu is being displayed with this function setto [On]. Hiding the on-screen menu will restore thescreen to the appropriate brightness.● If the [Dynamic backlight control] setting is differentfor each input, the screen brightness may change byswitching input.● Depending on the displayed image, the screen mayflicker. If this annoys you, set [Dynamic backlightcontrol] to [Off].■ [EDID select]This menu is displayed in HDMI 1 and HDMI 2 inputs.EDID data of each terminal is switched.[4K/60p/SDR]:Sets EDID compatible with 4K video signals(Max. 4 096 x 2 160 dots, Max. vertical operationfrequency 60 Hz).This EDID supports SDR (Standard DynamicRange). HDR (High Dynamic Range) is notsupported.[4K/60p/HDR]:Sets EDID compatible with 4K video signals(Max. 4 096 x 2 160 dots, Max. vertical operationfrequency 60 Hz).This EDID supports HDR (High Dynamic Range).[4K/30p]:Sets EDID compatible with 4K video signals(Max. 4 096 x 2 160 dots, Max. vertical operationfrequency 30 Hz).[2K]:Sets EDID compatible with 2K video signals (Max.1 920 x 1 200 dots).