Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 55 page image

55EnglishWhen PC is selected59.95 Hz154.00 MHz1920x1200/6074.04 kHz0SignalInput resolutionV-freq.H-freq.Dot clock freq.Input levelSignal formatAutoMPEG noise reductionNoise reductionOffAutoDynamic backlight control OffFrame creation OffSync AutoCinema reality OffComponent/RGB-in select RGBWhen USB / MEMORY VIEWER is selectedSignalNoise reductionMPEG noise reductionAutoOffFrame creation OffNote● [Signal] setup menu displays a different settingcondition for each input signal.● Menu that cannot be adjusted is greyed out.■ [Component/RGB-in select]This menu is displayed at PC signal input.Select to match the signals from the sourceconnected to PC IN terminal.[Component]:YPBPR /YCBC R signals[RGB]:RGB signals■ [YUV/RGB-in select]This menu is displayed at HDMI 1, HDMI 2,DisplayPort, DIGITAL LINK, DVI-D IN and SLOTinputs.Select to match the signals from the sourceconnected to each terminal.[Auto]:YUV/RGB setting is automatically switched.[YUV]:YUV signals[RGB]:RGB signalsNote● Set for each input terminal (HDMI 1, HDMI 2,DisplayPort, DIGITAL LINK, DVI-D IN, SLOT).■ [Sync]This menu is displayed at PC IN input.Setting RGB/PC sync signal[Auto]:The H and V sync or synchronized signal isautomatically selected. When both of them havesync signal, H and V sync will be selected.When displaying CS signal, connect to HD inputterminal.[on G]:Uses a synchronized signal on the Video Gsignal, which is input from the G connector.[HV sync]:Uses a synchronized signal on the Video HD/VDsignal, which is input from the HD/VD connector.Setting Component sync signal[Auto]:The H and V sync or synchronized signal isautomatically selected. When both of them havesync signal, H and V sync will be selected.When displaying CS signal, connect to HD inputterminal.[on Y]:Uses a synchronized signal on the Video Ysignal, which is input from the Y connector.[HV sync]:Uses a synchronized signal on the Video HD/VDsignal, which is input from the HD/VD connector.■ [Cinema reality]Faithfully reproduces videos shot with cinema films.Set this to [Off] normally.Note● In [ENGLISH(US)] OSD language, [Cinema reality]is displayed as [3:2 PULLDOWN].● If [Cinema reality] is set to [On], videos includingmovies shot at 24 frames per second arereproduced more naturally.● If the video is unnatural with [On] set, set it to [Off].■ [Noise reduction]Reduces picture noise.[Off]:Disables [Noise reduction].[Min], [Mid], [Max]:Sets strength of [Noise reduction].[Auto]:[Noise reduction] will be automatically selectedfrom [Min], [Mid] or [Max].