Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 66 page image

66English■ [Changing delay]Sets the delay time until the input is switched when[Power management mode] is [Input detection].[Off]:Switches the input if a signal is interrupted even fora very short period.1 to 10:Sets the delay time (sec.). Switches the input whenthe set time has elapsed after detecting no signalis present. However, if the detection period duringwhich no signal is present is shorter than the setdelay time, the input is not switched.Note● The operation when [Input detection] is selected is thesame as the operation when [Input search] is set to[Input detection]. (see page 58)Audio input select[Audio input select] - submenu screenHDMI1HDMI2DVI-DPCHDMI2HDMI1Audio input selectDisplayPortDisplayPortDIGITAL LINKDIGITAL LINKAUDIO IN1AUIDIO IN2SLOTSLOTVideo input Audio inputHDMI1 HDMI1 / AUDIO IN1 / AUIDIOIN2 / No audioHDMI2 HDMI2 / AUDIO IN1 / AUIDIOIN2 / No audioDisplayPort DisplayPort / AUDIO IN1 /AUIDIO IN2 / No audioDIGITAL LINK DIGITAL LINK / AUDIO IN1 /AUIDIO IN2 / No audioDVI-D / PC AUDIO IN1 / AUIDIO IN2 / NoaudioSLOT SLOT / AUDIO IN1 / AUIDIOIN2 / No audio● No audio: No audio input (Mute)When the setting for the audio input has beenchanged from the factory settings, the audio input isdisplayed as below.HDMI1FullAUDIO IN1HDMI-CEC settingsSet for HDMI-CEC function.For details of HDMI-CEC function, refer to “Using HDMI-CEC function”. (see page 118)[HDMI-CEC settings] - submenu screen1HDMI-CEC settingsHDMI-CEC control EnableDisableHDMI2 --------HDMI-CEC operationMENU codeHDMI1Display → DeviceDisableDevice → DisplayLink function■ [HDMI-CEC control]Enables/Disables the HDMI-CEC function.[Disable]: Disables HDMI-CEC control.[Enable]: Enables HDMI-CEC control.Note● Set to [Enable] to operate HDMI-CEC compatibledevice with remote control of the unit.■ [HDMI1]Displays the device to operate when HDMI-CECcompatible device is connected to HDMI 1 terminal.The control subject can be changed with .Note● When there is no connected device, [----] will bedisplayed.■ [HDMI2]Displays the device to operate when HDMI-CECcompatible device is connected to HDMI 2 terminal.The control subject can be changed with .Note● When there is no connected device, [----] will bedisplayed.■ [HDMI-CEC operation]Displays the operation screen of the HDMI-CECcompatible device.Press to hide the operation screen.■ [MENU code]Changes the code to assign for the [MENU] operationon the HDMI-CEC operation screen.Adjust the code to that of the connected HDMI-CECcompatible device.