70English■ Customized setting for days of the week1 Set [Day] to [Custom].2 While [Day] is selected, press .The [Day] screen appears.DayMONDAYAllTUESDAY WEDNESDAYTHURSDAY FRIDAY SATURDAYSUNDAYMoves the focus. Selects days. (Put check marks on daysto select.) Cancels the day selection. (Delete acheck mark if it has been put.) Saves the current setting, and returns tothe timer setup screen. Returns to the timer setup screen withoutsaving the current setting.3 Change the setting, press , and return tothe timer setup screen.• With [All], all days are selected/cancelled.Note● Use the remote control for the “Customized settingfor days of the week” operation.● If the [Day] screen is deleted without pressing, the setting is not saved.Date and timeSet date and time. ([- -] shows no programme is set.)[Date and time] - submenu screenDate and timeSetMONDAY 10:002018/01/01Year 2018MonthDayHourMinute11100Synchronize display OffParent or child setting ChildSynchronize display settingNTP synchronization OffTime zone (GMT + 00:00)NTP statusClock display Off■ Set date and timeSelect [Year / Month / Day / Hour / Minute].Set the selected item.Date and timeSetMONDAY 10:002018/01/01Year 2018MonthDayHourMinute11100Select [Set] and press .99:992015/01/01Date and timeSetTUESDAY 18:002018/02/06Year 2018MonthDayHourMinute26180Note● If the present date and time are not set, the timesettings for [Set up timer], [Screensaver], etc. cannotbe made.● The present date and time setting is reset in thefollowing case.When the main unit is left unattended for 7 days orlonger after the main unit is turned off with the Power On / Off button>, the power plug is removed,or power failure has occurred, etc.● Date and time cannot be set when [Year / Month /Day / Hour / Minute] are set to [- -].● The upper limit of date and time that can be set is,Year 2035, Month 12, Day 31, Hour 23 and Minute59.
