93EnglishFor [User]5 Enter the new user name and password, andthen click [Change].The screen of step 3 is displayed again.6 Enter the new user name and password.Enter the new user name and password set in step5.7 Click [OK].Note● The password used here is the same passwordused for command control and the PJLink securityauthentication.● Default user name and password are as follows:User name: dispuser (user rights)dispadmin (administrator rights)Password: @PanasonicChange password first.● When [Reset] for [Network settings] of this unit isexecuted, the password change is also required afterlog-in. (see page 75)● The password can be changed on the PasswordSetup screen after logging in (see page 98). Log inwith administer privileges to change this.● If a wrong user name/password is entered 3 timeswhen you log in, the field will be locked for severalminutes.● When using “Crestron Connected” (see page 99), login with the administrator rights.● Depending on the browser, displayed operations maychange.● Under no circumstances, Panasonic Corporation orits associated companies will ask customers theirpassword directly.Even if you are asked directly, please do not revealyour password.Operating with Web Browser■ Description of each sectionPage tabClick these to switch pages.[Status]Click this item, and the status of the Display isdisplayed.[Display control]Click this item to display the Display control page.[Detailed set up]Click this item to display the advanced settingspage.[Change password][Crestron Connected]Click this item to display the Crestron Connectedoperation page.[Browser Remote Control]Click this item to display the Browser RemoteControl on the WEB browser, which is the same asthe supplied remote control.■ Display status pageDisplays the display status.Click [Status] → [Display status].Displays the type of Display.Displays the firmware version of the display.
