Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 39 page image

39EnglishDigital ZOOMSelect the screen areas (25 areas) to zoom in, andzoom in the selected image areas ×2, ×3 or ×4.(Operate using the remote control. The buttons on theunit cannot be used for some operations.)EnterSelectExitDigital Zoom1 Set the digital zoom mode.Press .×1ExitRETURNENTERThe screen aspect is set to [Full], and the digitalzoom operation guide is displayed.2 Select the image areas to zoom in.Select pressing .×1ExitRETURNENTERDigital Zoom operation guide3 Switch the zoom ratio for the screenareas.Switches every time is pressed.×1 ×2 ×3 ×4×1Exit×2Exit×3Exit ×4Exit● If no operation is performed for the period set for[Menu display duration] (see page 79) (5 ‒ 180seconds) when the zoom ratio for the screen is“×1”, the unit exits the zoom mode.● If no operation is performed for approx. 3 secondswhen the zoom ratio for the screen is “×2”,“×3” or “×4”, the digital zoom operation guidedisplay disappears. Pressing any of thebuttons displays the guide again.4 Exit the digital zoom mode.Press to exit the mode.The screen returns to the previous state just beforeentering the digital zoom mode, and the digital zoomoperation guide display disappears.● Press any of the following buttons to exit themode. Then, the operation of the pressed buttonis performed.Remote Control: > <1> ‒ <6>Unit: <+ (Unit)><- (Unit)> ● When the screen saver timer starts up, the digitalzoom mode finishes.● When the power is turned OFF, a force-quit isperformed.• When the power is turned OFF by pressing the.• When the display is turned OFF at the Power On / Off button>• When the power is turned OFF by the off-timer• When the power is turned OFF by [No signalpower off] or “Power management”.Note● In the following cases, the digital zoom mode is notavailable.• When [Multi display settings] - [Multi screendisplay] is [On]• When the screen saver is in operation• When USB input or MEMORY VIEWER input isselected.● The zoomed image is rougher than the originalimage.