131English■ Unit1 Press times and display the [Setup] menu.2 Select [OSD language] with , andthen press and hold for more than 5 seconds.3 Select [Yes] with <- (Unit)> and press.The message [Shipping ( Wait a moment )] will bedisplayed.4 After the message [Please turn offthe power.] is displayed, turn thepower off pressing Off button> ( ).● If the is locked,please disconnect the AC cord plug from the walloutlet.Shipping conditionIt is possible to reset the following data to the factorysettings.Settings and set values of [Picture], [Sound], [Setup] and[Position] menus and user image registered in [Setup] -[Image settings]■ Remote control1 Press to display the [Setup]menu.2 Select [Options] with and press.The following screen will be displayed.OptionsDisplay informationSoftware licensesCloning passwordUSB data cloningShippingLAN data cloningOutput log data3 Select [Shipping] with and press.ShippingYes No4 Select [Yes] with and press.The message [Shipping ( Wait a moment )] will bedisplayed.5 After the message [Please turn offthe power.] is displayed, turn thepower off pressing Off button> ( ).● If the is locked,please disconnect the AC cord plug from the walloutlet.InitializationWhen both main unit buttons and remote control buttonsare disabled due to the [Button lock], [Controller userlevel] and [Controller ID function] settings, set all thevalues [Off] so that all the buttons are enabled again.Press <- (Unit)> together with and hold for more than 5 seconds.[Shipping] is displayed and the lock is released whenit disappears.ShippingYes No● Settings for [Button lock], [Controller user level]and [Controller ID function] will be back to [Off].
