Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 109 page image

109EnglishResume Play functionAfter Media Player ends, the file to be played back nexttime varies depending on the setting of [USB mediaplayer settings] - [Resume play].When set to [On]:The file played prior to the end of Media Player startsplaying from the beginning.When set to [Off]:Play starts from the beginning of the first file of thescenario.Note● The resume play function is retained until the unit isturned off or the USB memory device is taken out.Playlist edit functionThis function creates and edits a scenario file for theUSB media player. Select [Setup] – [USB media playersettings] – [Playlist edit] to select the desired content,set the playback order and play time, and output the file(scenario.dat) to the USB memory device.Note● Descriptions for the scenario (scenario.dat) arerestricted by the USB media player.● After the playlist is edited, “Single Media Player (Type2)” operates.● If a scenario file (scenario.dat) already exists in theUSB memory device, delete it, and create a new one.● If a file list file (filelist.dat) already exists in the USBmemory device, delete them.● While editing the playlist, the following functions aredisabled.[Position][Sound][Picture][Setup]- [Signal]- [Input label]- [Power management settings] -[No signal power off]- [Image settings] - [Read user image]- [Multi display settings]- [Function button settings]- [Failover/Failback]- [Audio input select][Digital zoom]● The screen and audio quality while editing the playlistis adjusted with the same content as that for theMEMORY VIEWER input.● Editing the playlist requires 2 MB or more of space inthe USB memory device.● Use a USB memory device for which file reading andwriting can be normally performed.● Use the remote control for the playlist editing functionoperation.1. File selection screenSelect content files to play.After selecting the files, press <6> to go to the nextediting screen.Press the remote control buttons to perform thefollowing operations. Selects content files. (Add a check mark onthe upper left of the thumbnail.) Cancels content selection. (Delete a checkmark on the upper left of the thumbnail ifthere is.)Moves the focus.<4> Deletes all the check marks. Plays content files or moves to adifferent hierarchy. Finishes editing the playlist or moves toa higher hierarchy.<6> Goes to the next editing screen.Note● If a scenario (scenario.dat) exists in the USBmemory device, it will be loaded automatically. Ifapplicable files are present, they are already in theselected status on the content selection screen.● Up to 999 lines can be read from a scenario(scenario.dat).● If a file list (filelist.dat) exists in the USB memorydevice, it will not be loaded even if a scenario(scenario.dat) is present, and then the contentselection screen appears with no content filesselected.● In addition to files immediately below root in theUSB memory device, files in folders can also beselected.● A maximum of 999 content files can be selected.● If 999 files are selected, pressing for filesnot selected cannot select such files.● When all the check marks are removed with <4>, aconfirmation screen is displayed before removal.