Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 67 page image

67English■ [Display → Device]Enables/Disables this unit to perform interlockingcontrol of the HDMI-CEC compatible device.[Disable]:Disables this unit to perform interlocking control of theHDMI-CEC compatible device.Even if the power status of this unit changes, thepower status of the device will not be affected.[Power off]:Turning this unit off (standby) turns off (standby) allthe devices connected to the HDMI 1 and HDMI 2terminals. The power-on operation is not interlocked.[Power off / on]:The device turns off/on (standby) in conjunction withthe power-off/on (standby) operation of this unit.Note● For details of operation, refer to “Using HDMI-CECfunction”. (see page 118)■ [Device → Display]Enables/Disables the HDMI-CEC compatible deviceto perform interlocking control of this unit.[Disable]:Disables the device to perform interlocking control ofthis unit.Even if the power status of the device changes, thepower status of this unit will not be affected.[Power on]:Turning on the device turns on this unit, and the input(HDMI1/HDMI2) is switched to that of the device.[Power off / on]:The power status of this unit interlocks with thepower-off/on operation of the device.Note● For details of operation, refer to “Using HDMI-CECfunction”. (see page 118)● Input will not be switched when [Setup] - [Input lock]is set.Image settingsSets the image displayed on the screen when the poweris turned on or no signal is input.[Image settings] - submenu screenImage settingsStartup image settingsNo signal image settings[Startup image settings]:Sets the image displayed when the power is turnedon.[No signal image settings]:Sets the image displayed when there is no signal atthe selected input terminal.Conditions of the image that can be set in [Readuser image]● Image size: 3 840 x 2 160, 1 920 x 1 080 only● jpg files / bmp files (except for the ones that cannotbe played back with USB media player (see page103))File and folder names are displayed on the file listwith conditions as below.‒ If a file or folder is placed directly under the rootdirectory of the USB device.● Up to 246 characters of file name (including theextension) are properly displayed.Note that the file list may disappear due to thedisplay time of the on-screen menu before theentire display of file names completely appears.● Up to 244 characters of folder name are properlydisplayed.• If the folder is placed hierarchically, the numberof characters displayed decreases by thenumber of characters for the file path (folderinformation).‒ Only the files with file names described with ASCIIcharacters excluding control code are displayed.Note● [Picture] cannot be adjusted when setting the startupimage.● Only [Backlight], [Gamma] and [Colour temperature]can be adjusted when setting the no-signal image.● Images displayed for the startup image and no-signalimage may slightly differ from images confirmed onthe computer.● When [No signal image settings] is set to [On], [Inputsearch] and [Failover/Failback] will be disabled, andthe menu will be greyed out.