Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 65 page image

65English■ [DisplayPort power management]When this function is set to [On], it operates underthe following conditions to turn the power on or offautomatically.When no pictures (sync signal) are detected for60 seconds or so at DisplayPort input:Power is turned off (standby); the power indicatorlights up orange.When pictures (sync signal) are subsequentlydetected at DisplayPort input:Power is turned on; the power indicator lights upgreen.Note● This function may not operate depending on the videooutput devices.■ [DIGITAL LINK power management]When this function is set to [On], it operates underthe following conditions to turn the power on or offautomatically.When no pictures (sync signal) are detected for60 seconds or so at DIGITAL LINK input:Power is turned off (standby); the power indicatorlights up orange.When pictures (sync signal) are subsequentlydetected at DIGITAL LINK input:Power is turned on; the power indicator lights upgreen.Note● This function may not operate depending on the videooutput devices.■ [DVI-D power management]When this function is set to [On], it operates underthe following conditions to turn the power on or offautomatically.When no pictures (sync signal) are detected for60 seconds or so at DVI-D input:Power is turned off (standby); the power indicatorlights up orange.When pictures (sync signal) are subsequentlydetected at DVI-D input:Power is turned on; the power indicator lights upgreen.Note● This function may not operate depending on the videooutput devices.■ [PC power management] (DPMS function)When this function is set to [On], it operates underthe following conditions to turn the power on or offautomatically.When no pictures (HD/VD sync signals) aredetected for 60 seconds or so at PC input:Power is turned off (standby); the power indicatorlights up orange.When pictures (HD/VD sync signals) aresubsequently detected at PC input:Power is turned on; the power indicator lights upgreen.Note● This function is effective when [Sync] in [Signal] is setto [Auto] or [HV sync] and [Component/RGB-in select]are set to [RGB]. (see page 55)● This function may not operate depending on the videooutput devices.■ [Power save]This function adjusts the brightness of the backlight toreduce power consumption.[Off]:The power save function does not operate.[On]:Backlight brightness is reduced.■ [Extended standby mode]Sets the operation in standby mode by the “Powermanagement” function for the input terminal for whichthe “Power management” function is set to [On].[On]:If a video signal (synchronized signal) is detectedat any of the input terminals for which the “Powermanagement” function is set to [On], the poweris turned “ON”, and the input is switched to thedetected input.[Off]:If a video signal (synchronized signal) is detectedat the input terminal with which the standby modeis entered, the power is turned “ON” with the input.Note● When [Input search] is [All inputs] or [Custom], the[Input search] function is prioritised. (The “Powermanagement” function does not operate for eachterminal.) (For details of [Input search] function, seepage 58.)● When [Failover/Failback] - [Input change mode] isset to items other than [Off], the [Failover/Failback]function is prioritised. (The “Power management”function does not operate for each terminal.) (Fordetails of [Failover/Failback] function, see page 60.)