Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 111 page image

111EnglishSchedule playback function using“Content Management Software”This unit supports “Content Management Software” tocreate schedule data on a PC required to play back stillpictures and motion pictures.Functions that can be set with “Content ManagementSoftware” are as follows.• Content playback (Still pictures/Motion pictures)• Music playback• Input switch• Power control• Multi screen display setting of the multi display• Caption displayFor setting method and details of each function, refer tothe manual of “Content Management Software”.Note● To use this function, set [USB media player] and[Schedule play function] to [Enable] in [Setup] - [USBmedia player settings]. (see page 75)● About supported devices, refer to “Supported device”.(see page 103)● When using this function, insert the USB memorydevice in power-on state or in schedule standby state.If the USB memory device is inserted in conditionsother than the said states, the schedule playback isnot performed.● Functions restricted when using the “USB mediaplayer” are also restricted when using the scheduleplayback function.■ Schedule play modeWhen [USB media player] is set to [Enable] and[Schedule play function] is set to [Enable], this unitenters schedule play mode, and the content is playedback according to the set schedule.If it entered schedule play mode at the time when theschedule is already specified, the unit operates asfollows according to [Play mode] (see page 76).• In [Individual play] modePlayback starts from the beginning of the specifiedschedule.• In [Synchronize play] modeSynchronized playback starts at the next contentstart time.Note● When the unit enters schedule play mode, the input isautomatically switched to [USB].● Some of the main unit’s functions are disabled duringschedule play mode.● If the input is switched during schedule play mode,the schedule playback is suspended.To resume the schedule playback• Switching the input to [USB] will resume playbackfrom the next schedule.• If the power is turned off using the remote control,the power is turned on at the next power-onschedule. Then the schedule playback starts.The schedule playback is restored by the aboveoperations.● When is pressed during schedule playmode, the [Schedule play mode] display appears.● The scenario playback function of the media playerdoes not operate in [Schedule play mode].■ Content playbackSpecified content is played back at the time set forschedule.Playback files in the following formats are supported.Still picturesExtension Format Limitationjpg/jpeg/jpeJPEG Number of pixels:Minimum 32 x 18Maximum 4 096 x 4 096(supports baseline only)YUV format:supports YUV444, YUV442and YUV440Colour mode:supports RGB onlybmp WindowsBitmapNumber of pixels:Minimum 32 x 18Maximum 2 000 x 2 000(1 bit, 4 bits, 8 bits, 24 bits)Following formats are notsupported:Run-length encoding, bitfield, top-down, transparentdataMotion picturesExtension CodecVideo Audioavi H.264/MPEG4AVCMPEG4 VisualVC-1 AdvancedVC-1 Simple &MainAAC-LC/LPCM/MP3WMA Standardwmv H.264/MPEG4AVCMPEG4 VisualVC-1 AdvancedVC-1 Simple &MainLPCM/MP3/WMA Standard/WMA9/WMA10 Promp4 /movH.264/MPEG4AVCMPEG4 VisualH.265/HEVCAAC-LC/HE-AAC/MP3