71English■ [Clock display]Sets to display / hide the clock.[Off]:Hides the clock.[On]:Displays the clock.Note● The clock is displayed at the lower left of the screenwhen button is pressed.Display duration is approx. 5 seconds.● When current date and time is not set, the clock is notdisplayed even when [Clock display] is [On].■ [Synchronize display setting]Synchronizes the time of all the displays connected onthe network.Note● This function does not operate if the displays tosynchronize the time are not connected via a LAN.● This function operates only when the devicesconnected via a LAN are connected with different IPaddresses.● The time synchronization operates only in power-onstate or in schedule standby state.● Normal operation is achieved only when the displaysynchronization function is enabled among the units.If other devices are connected on the same network,operation may not be normal.[Synchronize display]:Enables/Disables display synchronization function.[Parent or child setting]:Set this unit to [Parent] or [Child] for displaysynchronization.Operates when [Synchronize display] is [On].[Parent]:Set the time as a source of synchronization.[Child]:Synchronizes with the time of the parent.Note● When [Synchronize display] is [On], and [Parent orchild setting] is [Child], date and time cannot be set.● When [Synchronize display] is [On], and [Parent orchild setting] is [Child], [NTP synchronization] off-operation is performed.● If two or more displays with [Parent] set are presenton one network, display synchronization does notoperate properly.● Time is not synchronized if no displays with [Parent]set is present on one network.● Time is not synchronized if the time is not set for thedisplay with [Parent] set on the network.● Depending on the network environment,synchronization may be largely lost.● Synchronization is not possible if a router is placedbetween the displays with [Parent] and [Child] set.● Synchronization is not possible via a wireless LAN.■ [NTP status]Displays the current [NTP synchronization] and [Timezone] (see page 95) settings.Note● When [NTP synchronization] is set to [On], and if[Synchronize display] and [Parent or child setting]are set to [On] and [Child] respectively, [NTPsynchronization] shows [--], and the off-operation isperformed.● When [NTP synchronization] is [On], date and timecannot be set.● The settings for [NTP synchronization] and [Timezone] cannot be changed with this menu. Change thesettings with WEB browser. (see page 95)● [NTP synchronization] operates only in power-onstate or in schedule standby state.
