Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 68 page image

68English■ [Startup image settings] /[No signal image settings]Operate [No signal image settings] in the same wayas [Startup image settings].[Startup image settings] - submenu screenStartup image settingsDisplay settingUser imageOnImage selectClear user imageRead user image[Display setting]Sets the image display when the power is turned on.[Off]: Disables each image setting function.[On]: Enables each image setting function.Note● When no-signal image is displayed, the screenposition moves at certain intervals and images aredisplayed to alleviate burn-in on the LCD panel.● Shifts the display position regardless of the settingof [Wobbling] (see page 63).● When this function is operating, part of the screenmay appear to be missing.[Image select]Select the image to display.[Default image]: Panasonic logo (blue background)[User image]: Image registered by the userNote● Only when [Default image] is displayed, the logoautomatically rotates according to the [Displayorientation] (see page 79) setting or installationorientation.● When [User image] is selected, the image doesnot rotate according to the [Display orientation]setting or installation orientation. Prepare an imageof 3 840 × 2 160 or 1 920 × 1 080 aspect ratiocompatible with the installation orientation.● [Default image] of [No signal image settings] is thePanasonic logo (black background).[Read user image]Register the image read from a USB memory device.[Read user image] - submenu screenRead user imageg_sample0_folder_sample..usb/picture/Select a no signal image.z_sample1sample.jpg2sample.jpg3sample.jpga_sample.jpgj_sample.jpgv_sample.jpgNote● Set the input to something other than [USB] or[MEMORY VIEWER], and read the image.● One user image can be registered for [Startupimage settings] and [No signal image settings]respectively.● Do not turn the power off while reading the userimage.● The selected image is previewed on the [Readuser image] submenu screen.● When USB memory device is not connected to theUSB terminal, [Read user image] is greyed out andcannot be selected.● If starting to read the image while creating thepreview image, an access error will occur, and theimage may not be recognized as a image file.Confirm the preview image display, and then startreading process.● The displayed file names are restricted as follows.• Applicable extension: jpg, jpe, jpeg or bmp• The file name is not “.jpg”, “.jpe”, “.jpeg”, or“.bmp” which start with dot (.).● Depending on the OS setting, folders or files in theUSB memory invisible on your computer may bedisplayed on this unit.● If an image of 3 840 × 2 160 is registered for[Startup image settings], and [Image select] is setto [User image], the start-up time will be longer atpower-on.● If an image of 3 840 × 2 160 is registered for [Nosignal image settings], the displayed image qualitywill be equivalent of 1 920 × 1 080.[Clear user image]Clears the image read in [Read user image].[Startup image settings] - submenu screenStartup image settingsDisplay settingUser imageOnImage selectClear user imageRead user imageNote● When there is no [User image] that have beenread, [Clear user image] is greyed out and cannotbe selected.● When [Image select] is set to [User image],performing [Clear user image] will change thesetting of [Image select] to [Default image].