46English[Hue] Adjusts hue of skin colour.Reddish ↔ Greenish● In [ENGLISH(US)] OSD language, [Hue] is displayedas [TINT].[Sharpness] Adjusts picture sharpness.Less ↔ More[Enhance level] Switches the effect range forsharpness.[High]: Large effect[Low]: Small effect[Gamma] Adjusts gamma.[2.0], [2.2], [2.4], [2.6], [DICOM]:Small tilt - Large tiltNote● When [DICOM] is selected in [Picture mode],[Gamma] is fixed to [DICOM].When the items other than [DICOM] are selected in[Picture mode], [DICOM] cannot be set for [Gamma].[Colourtemperature]Adjusts colour tone.[3200K], [4000K], [5000K],[6500K], [7500K], [9300K],[10700K], [Native], [User1],[User2]Note● Emphasizes red when the numerical value of[Colour temperature] is small, and emphasizesblue when it is big.● [Native] is a colour tone of the panel element.When this is selected, [Gamma] is fixed to 2.2 orequivalent and it cannot be adjusted.● When [DICOM] is selected in [Picture mode], only[6500K] and [9300K] can be selected.User setting of [Colourtemperature]2 kinds of detailed [Colourtemperature] settings ([User1]and [User2]) can be stored.1 Press while setting[Colour temperature].2.26500KGammaColour temperatureExample:When [Colour temperature] is[6500K], it is possible to reflectthe set point, [6500K], to the setpoint of [User1] and [User2].2 Select the user to memorisesettings with and press.Adjust colour temperatureChange to 6500KUser1User23 Select [Yes] with and press.Adjust colour temperatureOverwrite colour temperature “User1”?Yes No4 Set each item on detail settingsscreen.15025564000Adjust colour temperatureUser1R gainG gainB gainR biasG biasB bias[R gain]Adjusts the white balance for lightred areas.0 to 255[G gain]Adjusts the white balance for lightgreen areas.0 to 255[B gain]Adjusts the white balance for lightblue areas.0 to 255[R bias]Adjusts the white balance for darkred areas.-127 to 128[G bias]Adjusts the white balance for darkgreen areas.-127 to 128[B bias]Adjusts the white balance for darkblue areas.-127 to 128The settings are saved for the user.When you return to [Picture] menu,the user you have set is selected for[Colour temperature].2.2User1GammaColour temperature