134EnglishLCD Display panelSymptoms CheckThe screen darkens slightlywhen bright pictures with minimalmovements are shown.The screen will darken slightly when photos, still images of a computer orother pictures with minimal movements are shown for an extended period.This is done to reduce image retention on the screen and the shortening ofthe screen’s service life: It is normal and not indicative of malfunctioning.It takes a while for the picture toappear.The unit digitally processes the various signals in order to reproduceesthetically pleasing images. As such, it sometimes takes a few momentsfor the picture to appear when the power has been turned on, when theinput has been switched.The edges of the images flicker.Due to the characteristics of the system used to drive the liquid crystalpanel, the edges may appear to flicker in the fast-moving parts of theimages: This is normal and not indicative of malfunctioning.There may be red spots, blue spots,green spots and black spots on thescreen.This is a characteristic of liquid crystal panels and is not a problem. Theliquid crystal panel is built with very high precision technology giving youfine picture details. Occasionally, a few non-active pixels may appear onthe screen as fixed points of red, blue, green, or black. Please note thisdoes not affect the performance of your LCD.Image retention may occur. If you display a still picture for an extendedperiod, the image might remain on the screen. However, it will disappearwhen a general moving picture is displayed for a while. This is notconsidered as malfunction.Image retention appearsThis LCD Display uses special image processing. Hence a slight time lag may occur between image and audio,depending on the type of input signal. However, this is not a malfunction.
