Panasonic TH-98SQ1W Operating Instructions Manual

Also see for TH-86SQ1W: Operating instructions Operating instructions Operating Instructions - Basic Guide Operating instructions Operating instructions

Contents

Panasonic TH-98SQ1W Operating Instructions Manual Manual pdf 130 page image

130EnglishCorrespondingsignalResolution(Dot)Scanningfrequency Dot clockfrequency(MHz)Format*2Plug and Play-supported signal*5Horizontal(kHz)Vertical(Hz)HDMIDL DP DVI-D/PCEDID1EDID2EDID3EDID41920 x 1080/60 1 920 x 1 080*3 66.59 59.93 138.50 R/D/H/DL/DP1920 x 1080/60 1 920 x 1 080 67.50 60.00 148.50 R/D/H/DL/DP ○ ○ ○ ○ ○ ○ ○1920 x 1200/60 1 920 x 1 200 74.04 59.95 154.00 R/D/H/DL/DP ○ ○ ○ ○ ○ ○ ○1920 x 2160/60 1 920 x 2 160 133.29 59.99 277.25 H/DL/DP1920 x 2160/60 1 920 x 2 160 135.00 60.00 297.00 H/DL/DP2560 x 1440/60 2 560 x 1 440 88.79 59.95 241.50 H/DL/DP ○ ○ ○2560 x 1600/50 2 560 x 1 600 82.37 49.95 286.00 H/DL/DP2560 x 1600/60 2 560 x 1 600 98.71 59.97 268.50 H/DL/DP3840 x 1080/60 3 840 x 1 080 66.63 59.97 266.50 H/DL/DP3840 x 2160/60 3 840 x 2 160 133.31 60.00 533.25 H/DL/DP ○3840 x 2160/30 3 840 x 2 160 65.69 29.98 262.75 H/DL/DP ○*1: Pixel-Repetition signal (dot clock frequency 27.0 MHz) only*2: Signals to represent formats are as follows.R : D-sub RGB (PC IN)Y : YPBPR /YCBC R (PC IN)D : DVI-D (DVI-D IN)H : HDMI (HDMI 1, HDMI 2)DL : DIGITAL LINK (DIGITAL LINK)DP : DisplayPort (DisplayPort)The analogue input supports onG and onY.*3: Based on VESA CVT-RB (Reduced Blanking) standard*4: YCBC R 420 format only supported.*5: Signals with ○ in the Plug and Play-supported signal column are the ones written in EDID (Extended DisplayIdentification Data) of this unit.For signals without ○ in the Plug and Play-supported signal column, resolutions may not be selected on the PCside even if this unit supports those signals.Note● An auto detected signal format may be differently displayed from the actual input signal.● [ i ] shown after the number of dots of resolution means the interlace signal.● When 1080/30PsF signal and 1080/25PsF signal are input, they are processed as 1080/60i signal and 1080/50isignal, and then displayed.● When 1920 x 2160/60 signal (dot clock frequency 297.00 MHz, DIGITAL LINK format) is input, 3840x2160/60p isdisplayed.