Panasonic KX-TVS125 Installation Manual

Also see for KX-TVS125: User guide Installation manual

Contents

Panasonic KX-TVS125 Installation Manual Manual pdf 56 page image

2.7 CONNECTIONS56 Installation ManualCable Clip (KX-TVS325 only)Lift the right end of the cable clip with your finger as shown below:Connect a 4-conductor cable or 2-conductor cable to the VPS and run the cable through theferrite core and under the cable clip (see the following sections). Close the ferrite core and thecable clip.2.7.3 Modular Plug ConnectionInsert the modular plug of the telephone cord into the modular jack on the port card. Guide thetelephone cord through a ferrite core and under the cable clip. Close the ferrite core and thecable clip.Telephone Line Modular Jacks2.7.4 Port CardsThere are 2 types of port expansion cards (see 2.6 INSTALLING PORT EXPANSION CARDS:KX-TVS102 OR KX-TVS204).• Four Digital ports expansion card (KX-TVS204)• Two Digital/Analog ports expansion card (KX-TVS102)One KX-TVS204 card (2 jacks) can support 4 VPS ports using the DPT Integration mode. TheKX-TVS204 card does not function with any other integration mode (Inband Integration,None).SLOT 6MODEM SLOT 5 SLOT 4 SLOT 3 SLOT 2 SLOT 1POWERSLOT 1SLOT 2SLOT 3POWERSLOT 1SLOT 2SLOT 3KX-TVS125 KX-TVS225 KX-TVS325