4.6 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TDA/KX-TAWInstallation Manual 1454.6.3 Live Call Screening Password CancelingTo cancel the password, follow the procedure below. (It is not necessary to enter StationProgramming to activate this feature). PC programming is also available (see 4.6.6 Live CallScreening Assignment via PC Programming).NoteThe term "Live Call Screening Password", used in KX-TA/KX-TD series PBXs, has thesame meaning as "Extension PIN (Personal Identification Number)" used in KX-TDA/KX-TAW series PBXs. For more information, refer to the KX-TDA/KX-TAW series manuals.1. Lift the handset or Press the SP-PHONE button.2. Press the feature number [ 799].3. Press [0].Screen output: Enter PIN4. Enter the stored password of maximum 10 digits.You will hear a confirmation tone, then a dial tone.Screen output: PIN cleared5. Hang up or Press the SP-PHONE button.4.6.4 Live Call Screening Recording Mode AssignmentThis program allows the VPS to continue recording the conversation in the mailbox after theextension intercepts the call during the Live Call Screening. (This is station level programmingand should be done at each individual phone.)1. Enter Station (Personal) Programming:With the phone on-hook, Press the PROGRAM button.(Display changes to PT-PGM Mode.)2. Enter [26].Screen output: Rec. after LCS3. Press the ENTER button.4. Press the SELECT button (AUTO ANSWER) until the desired selection is displayed.Screen output: Stop Record/Keep Record5. Press STORE.6. Press the PROGRAM button or lift the handset to exit the Station (Personal)Programming mode.7. Repeat these steps for each telephone.
