B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGSInstallation Manual 319B6 SYSTEM ADMINISTRATION—SYSTEMPARAMETER SETTINGSB6.1 System Group AssignmentSystem Group Assignment-Mailbox GroupThis parameter allows a caller to send a message simultaneously to several mailboxes. Thesemailboxes may be assembled into a list called a System Group Distribution List. The VPS isable to maintain up to 20 System Group Distribution Lists. Each list can have up to 20destination mailbox numbers. Mailboxes can be added to or deleted from these lists andreviewed as needed.Mailbox Group-EnterTo access the menu for System Group Assignment, follow the menu path as shown:System Administration Top Menu-1-5-1To access the menu for Mailbox Group, follow the menu path as shown:System Administration Top Menu-1-5-1-1To access the menu for Mailbox Group-Enter, follow the menu path as shown:System Administration Top Menu-1-5-1-1-1-Group List No.Table B-20Parameter Value Range(Default)Description/FunctionGroup ListNo.2-5 digits(None)Specifies any vacant mailbox number. The caller canspecify that the VPS transfers or delivers messages to allmembers of a group by simply specifying the SystemGroup Distribution List No.Group Name Up to 16characters(None)Specifies a group name. If a group name is not required,press RETURN, and specify the mailbox numbers.Any alphanumeric character and [(space)] can be used.Member 1-20 2-5 digits(None)Specifies mailbox numbers belonging to this group.
