4.5 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TA1232 AND KX-TDInstallation Manual 1334.5 DPT INTEGRATION FEATURES AND SETUPPROCEDURES FOR THE PANASONIC KX-TA1232 AND KX-TD SERIESThe following VPS features are functional on any KX-T7xxx proprietary telephone that workswhen connected to your PBX.4.5.1 Live Call Screening (LCS) ProgrammingLCS notifies subscribers of incoming messages to their mailboxes. The notification method isprogrammable for hands-free or private. Hands-free allows the user to monitor a recordingthrough the speakerphone and, if desired, intercept the call by lifting the handset. The privatemode notifies the user with an alert tone when a message is being recorded. By pressing theLCS button, the user can monitor the message and intercept the call by going off-hook.System Programming or PC Programming (only available for KX-TD500 users) alsodetermines whether the mailbox continues to record after the user intercepts the call.4.5.2 Live Call Screening Password AssignmentTo allow the Live Call Screening feature to work at an extension, the extension must have theLCS button lit. To light this button on the telephone, press the LCS button, then enter thepassword. This password prevents others from activating the LCS feature and listening to themessages as they are being left. (It is not necessary to enter PITS Programming to activatethis feature.)PC programming is also available for KX-TD500 users (see 4.5.6 Live Call ScreeningAssignment via PC Programming).1. Lift the handset or Press the SP-PHONE button.2. Dial the feature number [799].3. Enter a 3-digit password ([000]-[999]) twice.You will hear a confirmation tone, then a dial tone.Screen output: The 3-digit password you entered is displayed.4. Hang up or Press the SP-PHONE button.5. Repeat these steps for each telephone.
