D1 ACCESSING THE MESSAGE MANAGER’S MAILBOX388 Installation ManualD1 ACCESSING THE MESSAGE MANAGER’SMAILBOXThe Message Manager’s Mailbox must be accessed before performing any Message Managertask. To access the Message Manager’s mailbox, three items of information must be known:the telephone number connected directly to the Voice Mail Service, the Message Manager’sMailbox Number, and the Message Manager’s Password (if assigned). The MessageManager’s Mailbox Number is 98, 998, 9998, or 99998 depending upon the mailbox numberlength specified in System Programming. The Message Manager’s password is assignedthrough the Message Manager’s Service.Notes• If your VPS is the KX-TVS125 or KX-TVS225, the mailbox number is 998 by default.• If your VPS is the KX-TVS325, the mailbox number is 9998 by default.To Access the Message Manager’s Mailbox1. Dial the Extension Number connected to the Voice Mail Service. Or Dial any VPSExtension Number and Press [#] [6] (Service Access Command).2. Press [ ], then enter the Message Manager’s Mailbox Number 98, 998, 9998 or99998.3. Type the Password followed by [#]. The Main Menu of Message Manager’s Service willbe played.Please enter your party’s mailbox number.To enter by name, press [#] and [1].If you are using a rotary telephone, stay on the line.To call the operator, press [0].Enter your password, followed by [#].You have (number) new message(s).To transfer General Delivery Mailbox messages, press [1].To set up message waiting notification, press [2].To customize your mailbox, press [3].To set the clock, press [4].To modify message, press [5].To set station call forwarding, press [6].To end this call, press [ ].
