4.4 CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232, KX-TA1232 AND KX-TD308128 Installation Manual7. Follow steps 5-12 in 4.4.1 KX-TD1232 Software Verification and Programming for DPTIntegration via the Manager’s Extension.4.4.3 KX-TD308 Software Verification and Programming forDPT Integration via the Manager’s ExtensionIt is important that the KX-TD308 has the proper software level to allow DPT Integration withthe VPS. Follow the procedures below to confirm the software level, then complete therequired programming before starting up the VPS.All of the following procedures must be done after entering system programming. Referto the KX-TD308 Programming Guide or Installation Manual for instructions on how toenter the system programming mode.Software Verification1. Verify Software—check the software version of the KX-TD308 using System Program[116].Example: P871FYMMDDAThe underlined digits represent the software production date code (year, month, day). ForDPT Integration, the software version of the PBX must be P871F or higher.If the software version of the PBX is lower than this, you may not be able to utilizesome of the features available only with DPT Integration. For more information, callNational Parts Center at 1-800-833-9626.From the SYS-PGM NO ? screen:a) Enter [116].b) Press the NEXT button (SP-PHONE).c) The system displays the ROM version and the date it was created.This version must be P871F or higher for DPT Integration to be utilized.2. Set the date and time using System Program [000].3. Set PBX extension numbering using System Program [003].The required programming is now complete and the VPS and KX-TD1232 should be ableto communicate through DPT Integration.We recommend that the KX-TD1232 system has any optional extension cards installedand telephones connected before starting the VPS.When running the Quick Setup command (Section 5 CUSTOMIZING THE SYSTEM) fromthe VPS, the PBX transmits the station information automatically. This saves time whenprogramming the VPS.
