4.5 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TA1232 AND KX-TD142 Installation Manual4.5.13 Live Call Screening ActivationTo activate the Live Call Screening status, follow the steps below.PC programming is also available for KX-TD500 users (see 4.5.6 Live Call ScreeningAssignment via PC Programming).1. Press the assigned LCS Button.2. Press the assigned LCS Password.3. Confirm the assigned LCS Button is red-on.4. Repeat these steps for each telephone.4.5.14 Live Call Screening Password ControlThis feature allows Operator(s) and the Manager of the PBX to cancel the password for LCSat any extension. If a user forgets the preprogrammed password, Operator(s) and theManager of the PBX can cancel the LCS password.1. Enter PITS Programming:a. With the phone on-hook, Press the PROGRAM button.b. Dial [99]. (Display changes to PT-PGM Mode.)2. Dial [03].Screen output: Ext NO?3. Dial the desired Extension Number, or Press [ ] to remove all passwords.4. Press STORE.5. To exit the Station Programming mode, Press the PROGRAM button or lift the handset.6. Repeat these steps for each telephone.4.5.15 Two-Way Recording into MailboxThis feature allows extension users to record conversations into their mailboxes by pressingthe Two-Way Recording (TWR) button.4.5.16 Two-Way Transfer into MailboxThis feature allows an extension user to record a conversation into another person’s mailboxby pressing the Two-Way Transfer (TWT) button and dialing the mailbox number. This iscommonly used by a person who is taking a detailed message for someone else and wantsthe message recorded in the mailbox at the same time.Conditions: To activate the Live Call Screening features, it isnecessary to light the LCS button after assigning theLCS password and LCS button.
