7.2 UTILITY COMMANDSInstallation Manual 2157.2.12 Custom Service Menu Access Count Clear (CCLR)Each Custom Service has an access counter that counts the number of times the service hasbeen accessed. This command clears this counter.Type CCLR, Press Space, and Enter Custom Service Menu (1-100), then Press RETURN.NoteType CCLR 0 to clear the access counters of all Custom Services.7.2.13 Message Waiting Lamp Retry Times (MWL)Use the MWL command to specify the number of times the VPS will attempt to turn on theMessage Waiting Lamp of the called extension. Apply this setting when a PBX other than thePanasonic KX-T series telephone system is used.NoteThis setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes".7.2.14 Setting Minimum Recording Length (MRL)Use the MRL command to specify the minimum message recording length (0-3 s). Messagesshorter than the specified minimum recording length are discarded from the mailbox.NoteThe minimum recording length can only be set using this command.1. Type MRL, then Press RETURN.2. Type the message length.$ CCLR 20Custom Menu <20> Access Counter Cleared !!$ MWLCurrent Setting of M.W.L. Retry Count is 3Enter M.W.L. Retry Count (1-3) =$ MRLCurrent Setting of Minimum Recording Length is 2Enter Minimum Recording Length (0-3) =
