2.5 INSTALLATION STEPSInstallation Manual 492.5 INSTALLATION STEPSThe following is an overview of the standard installation process using DPT Integration. Whennecessary, other sections in this manual have been referenced for more detailed descriptionsor instructions.1. Obtain a list of current users, their extension numbers, their departments, and the type ofsystems they use (mailbox, no mailbox, beeper, car phone, etc.).2. Assess your customers' needs before setting up the system. You will save yourself timelater by giving customers what they need up front. Ask the office manager how the VPSwill be used. Give examples.Recommend that your customer use a word processor to log the greetings. You will findthese files much more easily than the worksheet pages if you need to make changesdown the road.3. Connect the power cord to the VPS, then turn power switch on.CAUTIONThe power supply cord is used as the main disconnect device. Ensure that thesocket-outlet is located/installed near the equipment and is easily accessible.4. If necessary, install optional port expansion cards (see 2.6 INSTALLING PORTEXPANSION CARDS: KX-TVS102 OR KX-TVS204).5. Standard Initialization (For DPT Integration Connection)a) Program the ports of the PBX for voice processing (see Section 4 INTEGRATINGTHE VPS WITH THE PANASONIC KX-T DIGITAL PBX).Program the KX-TD500, the KX-TD1232, the KX-TA1232, the KX-TD816, theKX-TD308, the KX-TDA series, or the KX-TAW series for Voice Mail integration.• KX-TD500, KX-TD816, KX-TD1232, KX-TA1232, KX-TD308, KX-TDAseries, KX-TAW seriesProgram may be performed on-site or at the office.All memory is stored and will be retained when the unit is powered up aslong as the DIP/Rotary Switch has been reset to position [0] prior toturning the unit off.b) Turn the power switch off at the VPS.c) Plug station wire(s) from the PBX into VPS (see 2.7 CONNECTIONS).d) Connect the personal computer to the VPS with a Null Modem Cable (see 2.8.2Connecting the RS-232C Cable).e) Set the DIP/Rotary Switch to position 5.f) Turn the power switch back on at the VPS.g) Wait until the "warning" appears on the screen.h) Set the DIP/Rotary Switch back to position 0.
