B5 SYSTEM ADMINISTRATION—SERVICE SETTINGS318 Installation ManualB5.4 Toll SaverThis feature permits a subscriber to check his mailbox from pre-assigned Caller ID numbersor by dialing a pre-assigned DID number without telephone charges. When called from theassigned number, the VPS notifies the subscriber whether or not there is a new message inhis mailbox by changing the delayed answer time (see Table B-19). The subscriber canreduce his telephone charges by entering his mailbox only when there is a new message. Ifthis feature is activated, the subscriber will access his mailbox directly.NoteDID number setting for this feature is only available when the VPS is connected to thefollowing PBXs with DPT Integration.• KX-TD816 (P311Q or higher)• KX-TD1232 (P211Q or higher)• KX-TD500 (V4M or higher)NoteThe Delayed Answer Time specified for Toll Saver has higher priority than the onespecified for the Port/Trunk Service.To access the menu for Toll Saver Parameter, follow the menu path as shown:System Administration Top Menu-1-4-4Table B-19Parameter Value Range(Default)Description/FunctionDelayedAnswer Timefor NewMessage5-60 s(12)Specifies the length of time (in seconds) before thesubscriber accesses a mailbox that has newmessages.DelayedAnswer Timefor No NewMessage5-60 s(24)Specifies the length of time (in seconds) before thesubscriber accesses a mailbox that has no newmessages.
