Panasonic KX-TVS125 Installation Manual

Also see for KX-TVS125: User guide Installation manual

Contents

Panasonic KX-TVS125 Installation Manual Manual pdf 114 page image

4.3 KX-TDA/KX-TAW SERIES PROGRAMMING FOR DIGITAL INTEGRATION114 Installation Manual4.3 KX-TDA/KX-TAW SERIES PROGRAMMINGFOR DIGITAL INTEGRATIONA group of DPT ports connected to a VPS with DPT Integration is called "VM (DPT) Group"for the KX-TDA/KX-TAW series. Each VM (DPT) Group consists of a maximum of 12 ports (24channels) of the VPS.Only one VM (DPT) Group can be assigned for the KX-TDA50 and KX-TAW. On the otherhand, up to two VM (DPT) Groups can be assigned for the KX-TDA100/TDA200; that is, twoVPSs can be connected to one PBX.It is necessary to assign the VM (DPT) Group and VM (DPT) extension ports to use DPTIntegration.1. Assignment of VM (DPT) Groupa) Go to the "3.Groups-7.VM(DPT) Group-2.Unit Setting" screen.b) Assign a floating Extension Number for VM Unit number.c) Click "Apply" to save the changed data.NoteYou can use a maximum two VM (DPT) groups (Unit No.1 and Unit No.2).All extension ports for one VM (DPT) group should be connected to only one DHLCcard or only one DLC card.Screen output:NoteThe above screen output is an example of the KX-TDA200.