1.3 SYSTEM BASICS24 Installation ManualMODE (DIP Switch)—KX-TVS325By setting one of the following positions and executing power down and up, you can achievea desired result:* For Panasonic KX-T series telephone systems with DPT Integration.To change the position, use a pointed object, such as a pen, etc.Table 1-1Position Additional Function0 Normal setting. (All switches in 0 position.)1 Initializes RS-232C parameters.RS-232C default parameters: 9,600, N, 8, 12* Auto Configuration is automatically executed andall ports are set for Automated Attendant service.3* Auto Configuration is automatically executed andall ports are set for Voice Mail service.4 Reserved.5Initializes the VPS. Clears all voice data (exceptUser 1 and User 2 prompts) and returns all systemparameters to the default setting.6 Test Mode (Hard Disk Drive Read/Write Test)7 Reserved.8Initializes the VPS. Clears all voice data andreturns all system parameters to the defaultsetting.CAUTIONUser 1 and User 2 Prompts will be erased!9-11 Reserved.12 All service prompts are set to System Prompts.13 All service prompts are set to User 1 Prompts.14 All service prompts are set to User 2 Prompts.15 Reserved.0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•0 10 10 10 11•2•3•4•
