5.2 PORT SETTING OPTIONSInstallation Manual 169Enter data into the Custom Service menu; use the table below as a guide.Table 5-3Description Value Range(Default)Description/FunctionDescription Up to 32characters(None)The information typed in this field is for reference only.Any ASCII character (except \) can be used.PromptMode1. System2. User 13. User 2(System)Specifies the language that the caller will hear whencalling this Custom Service.MenuRepeatCycle1-3 Times(3)Specifies the number of times the Custom Servicemenu will be repeated before the No DTMF Input entryis used.CallTransferAny TimeExtn./Mbx/No(Extn.)Specifies where a caller will be transferred when dialingan extension or mailbox number during the menu. If thisentry is set to "Extn.", the caller will be transferred to thecorresponding extension. If it is set to "Mbx", the callerwill be sent directly to the corresponding mailbox. If it isset to "No", extension transfer and mailbox transfer aredisabled; only 1-digit entries work (following theCustom Service menu).NoteThis parameter should be set to "No" whenSubscriber Service is specified as a CustomService option and it is desired that digits can beentered very quickly to specify a mailbox.Therefore, in most cases, "No" is the best settingfor this parameter. This is especially true if you donot want to explain "Call Transfer Any Time" in yourCustom Service menu recording.Wait forSecondDigit1-5 s(1)Used when the first digit of an extension is also a menuchoice within the Custom Service. If a second digit isnot dialed within the specified time, the menu choice isused.No DTMFInputOperationa-f, o(c)Used when a caller does not dial anything whenhearing the menu (usually rotary callers).KeypadAssignmenta-o( =d, 0=c,others=None)Specifies the action to be performed when a keypaddigit is dialed. Callers can access specific services bypressing the appropriate keys on their telephones.
