4.6 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TDA/KX-TAWInstallation Manual 1514.6.10 One-Touch Two-Way Transfer (One-Touch TWT) ButtonAssignmentFor the One-Touch Two-Way Transfer feature to work at an extension, the extension must havea One-Touch TWT button on it. This button must either be a DSS/BLF or CO button with alamp. Follow the procedure below to assign a One-Touch TWT button on an extension. (Thisis station level programming and should be done at each individual phone.) PC programmingis also available (see 4.6.12 Button Assignment via PC Programming).1. Enter Station (Personal) Programming:With the phone on-hook, Press the PROGRAM button.(Display changes to PT-PGM Mode.)2. Press the desired Flexible (CO or DSS/BLF) button you want to assign as the One-TouchTWT button.3. Press [91].Screen output: 2WAY-Xfr-4. Enter a Voice Mail floating extension number.Screen output: 2WAY-Xfr- _ _ _(_ _ _ = The Voice Mail floating extension number you entered).5. Press [#].6. Enter a Transferred extension number.Screen output: 2WAY-Xfr-_ _ _#_ _ _(#_ _ _ = The Transferred extension number you entered).7. Press STORE.8. Press the PROGRAM button or lift the handset to exit the Station (Personal)Programming mode.9. Repeat these steps for each telephone.Conditions: This button must be a flexible (CO or DSS/BLF)button to be programmed as a One-Touch TWTbutton. When all Voice Mail ports are busy and thiskey is pressed, the user will hear reorder tone.
