4.5 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TA1232 AND KX-TDInstallation Manual 1354.5.5 Live Call Screening Private/Hands-Free ModeAssignment via Station ProgrammingThis program assigns a VPS response for when a message is being left in a mailbox. Itdetermines whether an alert tone is sent or whether the recorded message is played throughthe built-in speaker of the extension. The default mode is hands-free. (This is a station levelprogram and should be done at each individual telephone.)PC programming is also available for KX-TD500 users (see 4.5.6 Live Call ScreeningAssignment via PC Programming).1. Enter Station Programming:a. With the phone on-hook, Press the PROGRAM button.b. Dial [99]. (Display changes to PT-PGM Mode.)2. Dial the code for the mode you want this telephone to have.Hands-Free = 71Private = 72Screen output: Hands-Free or Private3. Press STORE.4. To exit the Station Programming mode, Press the PROGRAM button or lift the handset.5. Repeat these steps for each telephone.A single-line telephone that is connected to the same extension as a proprietary telephonecan also be used to monitor an incoming message. Be sure that Live Call Screening on theconnected proprietary telephone has been activated. This feature is useful when you are usinga cordless telephone. The handset sounds an alert tone to let you know that a message isbeing recorded. To intercept the call, flash the hook.Conditions: None
