7) Remove the three mounting screws !1, and remove the inside upper cover !2; then,push in the fixing feeding assembly.Figure 7-4218) Remove the three mounting screws !3, and remove and turn over the control panel.Take care not to damage the surface of the control panel by the copier’s chassis.Figure 7-4229) Disconnect the three connectors (J911, J915, J955).!3!2!1COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-23Caution:
