2. Removing the Lifter Assembly1) Open the front door, and slide out the holding tray assembly about 10 cm from thecopier.2) Remove the rear cover.3) Remove the waste toner bottle.4) Remove the rear right grip assembly.5) Remove the three mounting screws q, and remove the waste toner bottle supportplate w.Figure 7-4596) Disconnect the connector e, and remove the three screws r; then, remove the lifterdrive assembly t.Figure 7-460ertqqwCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-42
