6. Orientation of the Separation RollerKeep the following in mind when replacing the separation roller:Figure 5-842If installed in the wrong orientation, the separation roller will interfere with thelocking washer.7. Orientation of the Feeding Roller of the Cassette/Deck Pick-Up AssemblyWhen installing the feeding roller to the cassette/deck pick-up assembly, install it sothat the belt pulley w is at the front of the copier.When installing the feeding roller e to the feeding roller shaft r, be sure so that themarking ‘5’ t is toward the front.q Feeding roller assembly r Feeding roller shaftw Belt pulley t Marking (roller)e Feeding rollerFigure 5-843w qr55etFrontWider groove Narrower groove(front of copier)(rear of copier)COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-76Caution:
