C. Pre-Exposure Lamp Unit1. Removing the Pre-Exposure Lamp Unit1) Open the front door, and slide out the hopper assembly; then, slide out thefixing/feeding unit.2) Remove the process unit. (See p. 7-17.)3) Remove the primary charging assembly and the pre-transfer charging assembly.4) Remove the blank exposure lamp assembly.5) Remove the two mounting screws q, and remove the blank exposure assembly railstay w.Figure 4-3086) Disconnect the connector q, and remove the two mounting screws w; then, removethe pre-exposure lamp unit e.Figure 4-309q weq qwCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-40
