D. Blank Exposure Lamp Assembly1. Removing the Blank Exposure Lamp Assembly1) Open the front door, and slide out the hopper assembly.2) Disconnect the two connectors q, and remove the mounting screw w; then, slideout the blank exposure lamp assembly e.Figure 4-310Take care not to damage the photosensitive drum when removing the blankexposure lamp assembly.qqweCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-41Caution:
