C. Making Overlay Copies (2nd side)1. OutlineThe feeding path for copying on the second side of an overlay copy is formed whenthe holding tray paper deflecting plate is lifted by the holding tray paper deflectingsolenoid (SL8).The second side is copied on copy paper picked up from the holding tray. The copypaper is first fed in the direction of the holding tray inlet and then switched back in thedirection of the holding tray registration roller.Figure 5-605CL5CL4SL6M2Holding tray re-pick up rollerCL6SL8PS14PS17Holding tray inlet rollerFeeding rollerHolding tray registration rollerHolding trayreversingregistrationrollerJ113A-5J113B-8J113A-7J113A-6J113A-3J113B-9J113B-11Holding tray pick-up detection signal (PS17D)Holding tray pick-up paper deflecting plate solenoid drive signal (HTPDD)Holding tray registration paper detection signal (PS14D)Holding tray reversing clutch drive signal (HTRVCD)Holding tray forward clutch drive signal (HTFWCD)Holding tray separation clutch drive signal (HTSPCD)Holding tray re-pick up roller solenoid drive signal (HTDSD)DC controller PCBPick-upmotorCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-24
