14. Position of the Holding Tray Paper Deflecting Plate Drive SolenoidInstall the solenoid so that its stroke (gap between the rubber silencer and the endof the solenoid) is 5.0 ±0.3 mm.Figure 5-88515. Removing the Side Guide Plate1) Mark the position of the side plate assembly with a scribe. (See Figure 5-894.)2) Remove the two mounting screws q, and disconnect the two connectors; then,remove the side guide plate assembly w.Figure 5-886qqw5.0–0.3mmCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-97
