VI. MAKING TWO-SIDED/OVERLAY COPIES (1st SIDE)A. Two-Sided/Overlay Copy OperationThe feeding path for copying on the first side of a two-sided/overlay copy is formedwhen the delivery paper deflecting plate is lifted by the delivery paper deflecting solenoid(SL2).The paper deflecting plate is lifted as soon as the registration clutch (CL9) turns ON.When its first side has been copied, the copy paper is fed to the holding tray by theholding tray inlet roller (CW rotation).The holding tray swinging solenoid (SL9) and the holding tray (X, Y) motor (M8, M9)help stack copy paper each time a sheet arrives at the holding tray. (See pp. 5-30 and -31.)When the first sheet is stacked on the holding tray assembly, the holding tray re-pickup roller is rotated to help stacking. The holding tray is capable of supporting up to 50sheets of copy paper.Figure 5-601DC controller PCBJ108A-7Registration paper detection signal (RGPD)J108B-4Fixing assembly outlet paper detection signal (FXDEL)J108A-19Fixing assembly inlet paper detection signal (FXCJS)J113B-10Holding tray inlet paper sensor (PS15D)J108B-10Delivery deflecting solenoid drive signal (DPDSD)J113B-12Internal delivery signal (IDPD)J113A-7Holding tray forward clutch drive signal (HTFWCD)J113A-6Holding tray reversing clutch drive signal (HTRVCD)J113A-5Holding tray re-pick up roller solenoid drive signal (HTDSD)SL2M2CL5CL4Pick-upmotorPS12PS47PS52PS15PS23SL6Holding tray inlet rollerHolding tray assemblyHolding tray re-pick up rollerHolding tray feeding assemblyCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-20
