2. Removing the Inside Upper Cover1) Remove the front door, and shift the fixing/feeding lever; then, slide out thefixing/feeding unit.2) Remove the three mounting screws q, and remove the inside upper cover w.Figure 7-4063. Removing the Fixing/Feeding Unit Front Cover1) Open the front door, and slide out the fixing/feeding unit.2) Remove the screw q of the releasing lever; then, while pushing the rear (inside ofthe fixing/feeding assembly) of the releasing lever locking shaft, shift the releasinglever w to remove.3) Remove the mounting screw e, and remove the fixing knob r.4) Remove the three mounting screws t, and remove the fixing/feeding assembly frontcover y.Figure 7-407qwertttyqwCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-15
