9. Positioning the Pick-Up Roller Releasing Solenoid (cassette)Make adjustments so that the distance from the bottom of the pick-up unit in eachcassette holder to the bottom end of the bushing of the roller support A is 36 ±0.5 mmwhen the plunger of the pick-up releasing roller is drawn as shown.Figure 10-23310. Adjusting the Position of the Pick-Up Roller Releasing Solenoid (deck)Adjust the position of the solenoid so that the distance from the center of the hole Ain the solenoid to the left end of the right solenoid arm is 57.2 ±0.5 mm as shown inFigure 10-234.Figure 10-234A57.2–0.5mm36–0.5AqCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 10 TROUBLESHOOTING10-26
