5) Open the front door, and remove the three mounting screws y; then, remove theconnector cover u, and remove the connector. Open the hopper i.Figure 7-419When installing the hopper assembly, check to make sure that the connector isconnected.6) Shift the fixing feeding assembly releasing lever o from vertical to horizontal, andslide out the fixing feeding assembly !0.Figure 7-420o!0ui yCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-22Caution:
