12. Removing the Separation Belt Assembly1) Remove the feeding roller/separation belt assembly.2) Remove the stop ring q and the bushing w at the front.Figure 5-8833) While lifting the front of the separation belt assembly, shift it to the rear to remove.4) Remove the belt from the separation belt assembly.13. Adjusting the Pressure of the Separation Roller of the Holding TrayTurn the separation roller adjusting roll so that the distance to the shaft is 32.7 ±0.1mm.Figure 5-88432.7–0.1mmqwCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-96
