Q. High-Voltage Transformer Assembly1. Remove the High-Voltage Transformer Assembly1) Remove the rear cover.2) Disconnect the four connectors q (J201, J202, J203, J301).3) Remove the three mounting screws w, and remove the PCB assembly e.Figure 7-4684) Remove the two fastons r, and disconnect the connector t; then, remove the twomounting screws, and remove the transformer assembly u.Figure 7-469The high-voltage transformer PCB needs factory adjustment like the transformerassembly itself; you must replace them in a set of two whenever either needsreplacement.rtyyuq wweCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-48Caution:
