I. Transfer/Separation Charging Assembly1. Removing the Transfer/Separation Charging Assembly1) Open the front door, and slide out the fixing/feeding unit.2) Remove the fixing/feeding front cover.3) Remove the mounting screw q, and remove the fixing guide w.Figure 4-3174) Disconnect the connector e, and slide out the transfer/separation charging assem-bly r to the front; then, remove it by lifting it at an angle to the left.Figure 4-318erABqwCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-46
