5. Removing the External Delivery Sensor and the Internal Delivery Sensor1) Remove the external delivery roller.2) Remove the two mounting screws q, external delivery sensor assembly, and internaldelivery sensor assembly w.Figure 6-2386. Removing the Fixing Assembly Outlet Paper Sensor Assembly1) Slide out the fixing/feeding unit to the front, and remove the front cover and the upperfixing unit. (See p. 6-20.)2) Remove the lower fixing separation claw assembly. (See p. 6-28.)3) Remove the mounting screw q, and remove the fixing assembly outlet paper sensorassembly w to the right; then, disconnect the connector e (J108), and remove thesensor.Figure 6-239qweqwCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 6 FIXING SYSTEM6-36
