5) Disconnect the connector y, and remove the registration feeding assembly u fromthe fixing/feeding unit.Figure 5-8513. Removing the Registration Roller (upper rubber roller)1) Loosen the two set screws q on the stopper of the electromagnetic clutch at therear.2) Remove the spring w, E-ring e, spacer r, bushing t, and bearing y.Figure 5-852qw ertyrtyuCOPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-80
